Instructions
Warm and Use Drip
To make your drip nice and smooth again, you can warm it up in the microwave or in a water bath.Method 1: In the Microwave (quick)
- Unscrew the cap and remove the seal.
- Place the open bottle in the microwave for approx. 40 seconds at 800 W.
- Carefully remove the bottle and knead it evenly until the drip is smooth.
- If needed: repeat in 10-second intervals until the drip is completely melted.
Tip: Right after heating, the drip will be very runny. If you want it to flow more slowly, let it cool down briefly.
Method 2: In a Water Bath
- Unscrew the cap, remove the seal, then close the bottle tightly again. Important: Contact with water will cause the drip to curdle—make sure no water gets into the bottle.
- Place the closed bottle in water heated to approx. 45°C for 10–15 minutes.
- Carefully remove the bottle and knead it evenly until you get a smooth consistency.
Storage
You can store any leftovers in the bottle at room temperature until you need them again.
Cleaning
After use, thoroughly rinse the dosing cap with hot water and screw it back on dry.